Description
A multi-connector adapter board for the BJ-JTAG-1 programmer. It lets the programmer attach to the common JTAG headers without hunting for a separate cable for each board you work on.
Useful as a spare, or to leave one adapter permanently wired into a test fixture so you can move the programmer between fixtures without re-wiring.
Connectors
| 1 | 14-pin, 2 mm pitch |
|---|---|
| 2 | 10-pin, 2 mm pitch |
| 3 | 10-pin, 2.54 mm pitch |
Signals
The signal names are printed on the board next to each pin — VREF, TMS, TCK, TDO, TDI, GND, NC and INIT — so you can see the pinout without a datasheet.
Notes
- This is the adapter board only. The programmer, USB cable and ribbon cable are sold separately.
- Not affiliated with or endorsed by any FPGA vendor.
Reviews
There are no reviews yet.